SPECIFICATIONS:
Input Voltage:	28 VDC±4 VDC,
Current:	10.7 amps typ. at 28 VDC / 85 VA load per phase. 1.1A max at NO load.
Output Voltage:	3 Wire Delta: 115Vrms±3% line to line or, 4 Wire Wye: 115 Vrms±3% line to neutral 200 Vrms±3% line to line
Load Unbalance:	Maximum load unbalance is 20% for specification performance.
Current:	Delta 115 V line to line: .73 Amp per phase Wye 115 V line to neutral: .73 Amp per phase Wye 200 V line to line: .43 Amp per phase
Power:	85 VA per phase, 250 VA total
Phase Angle:	120
Frequency:	400 Hz±1%
Waveform:	Sine wave/three phase configuration
Power Factor:	.8 lagging to .95 leading power factor
Distortion:	7% maximum (3.0% typ at 28 VDC in)
Overload (OL):	150% output current for at least 5 min
Short Circuit:	200% output current for 1 min.
Soft Start:	Soft start delay of approximately 500 mSec.
Reverse Polarity:	The inverter is protected against reverse polarity applied at the input
Efficiency:	81% minimum.
Temperature:	-65F to +185F (-55C to +85C)
Altitude:	75,000 ft.
Weight:	8.4 lbs. (3.81 kg.)
Environmental:	Designed to FAA TSO-C73 Appendix A and DO-160C env. cat. F2WBBTEWXDFSAAAZZUZKXX
Compliance:	FAA TSO-C73. Interchangeable dimensionally with 250 VA units conforming to MS21983-3.